Nylock Nuts, Washers and Bolts Nylock nuts, washers and bolts are an essential part of caravanning and camping. Zinc and galvanised threaded hardware secure equipment from axles to electric backing plates and couplings. Nylock nuts have become quite popular when used in galvanised u bolt kits due to their locking ability. 7/16 UNF nylock nut suits all 10? electric backing plates and 9? mechanical backing plates. Purchase electric and mechanical backing plates below. •9-inch Mechanical Brake. •10-inch Electric Backing Plate Brake Kit. •Electric and Mechanical Backing Plate Weld Ring. Nylock nuts are mechanically galvanised as opposed to hot-dip galvanising. Note: Nylock nuts should not be used more than once. Further, they should not be installed with a rattle gun. Specifications •3/8" UNF Zinc Nuts •3/8" x 1 "UNF Zinc Bolts •7/16" UNF Zinc Nuts •7/16" x 1 "UNF Zinc Bolts •1/2" Galvanised Washers •1/2" x BSW Galvanised Nylocks •9/16" x UNF Zinc Nylocks •5/8" x UNF Zinc Nylocks •5/8" x BSW Zinc Nylocks •16mm Galvanised Washers •Zinc Nylocks to suit Alko 16mm Bolts •16mm Galvanised Nylocks It is important to note that nylocks have a life span. Should you decide to remove them after tightening, the nylocks must be replaced because the nylon insert is worn. Replacement occurs when the nylon bush inside the nuts becomes grooved by the thread. Removing the nut, actually, damages the nylon groove and causes it not to re-grip properly when re-tightened. It is a great idea to re-tighten your u-bolts a few weeks after installation. Mild steel stretches a little and causes a little looseness in the u-bolt clamp.
SKU 701034
Brand Couplemate
Unit Of Measure Each

Be The First To Review This Product!

Help other Carasel Towbars Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

You may also like

More From This Category